Seikoh Giken Connector Buyers Guide
Click on any part number for the data sheet.
Single Mode Ferrules
|
Ferrule OD |
Contact |
Ferrule Pre-Shaping |
Flange (mm) |
Base Part Number1,2 |
|
2.5mm (SC, FC, ST) |
PC |
Flat |
ID1.0, OD4.5 |
SZ-1A14xxx80G3 |
|
Without flange |
ZS-1A11xxx80G4 |
|
Domed |
ID1.0, OD4.5 |
SZ-3A14xxx80G |
|
ID1.0, OD4.7 |
SZ-3A15xxx80G |
|
Without flange |
ZS-3A11xxx80G4 |
|
Domed, funnelled |
ID1.0, OD4.5 |
SFZ-3A14xxx80G |
|
ID1.0, OD4.7 |
SFZ-3A15xxx80G |
|
Without flange |
ZFS-3A11xxx80G4 |
|
APC, Conical |
Flat |
ID1.0, OD4.5 |
SNZ-1A14xxx00G |
|
Without flange |
ZNS-1A11xxx00G4 |
|
Angled |
ID1.0, OD4.5 |
SNZ-3A14xxx00G |
|
APC, Stepped |
Flat |
ID1.0, OD4.5 |
SGZ-1A14xxx00G |
|
Flat |
ID1.0, OD4.7 |
SGZ-1A15xxx00G |
|
Angled |
ID1.0, OD4.5 |
SGZ-3A14xxx00G |
|
1.25mm (MU) |
PC |
Flat |
ID1.0, W2.60 |
MUZ-1A14xxx800G |
|
APC |
Flat |
ID1.0, W2.75 |
MUNZ-1A14xxx000G |
|
1.25mm (LC) |
PC |
Flat |
ID1.0, W2.54/2.90 |
LCZ-2A14xxx801G |
|
APC |
Flat |
ID1.0, W2.65/3.06 |
LCNZ-1A14xxx001G |
Notes:
1) Eccentricity 0.5µm or less
2) For xxx code use table below
3) Discontinued
4) Use the data sheet for the same ferrule
with flange
Ferrule Internal Diameter Part Number Codes
|
Ferrule I.D. |
xxx |
|
125µm |
125 |
|
125.5µm |
12F |
|
126µm |
126 |
Connectors
Connector
(crimping tool) |
Contact |
Boot ID
(mm) |
Housing
(without ferrule) |
Plug
(with ferrule)1,2 |
|
SC (MDTK-02-120G) |
PC
(Pre-domed ferrule, Blue boot) |
0.9 |
SSC-P1511F3151G |
SSC-PE59xxx1F300G |
|
2 |
SSC-P25B1F301G |
SSC-PE5Bxxx1F300G |
|
2 (short boot) |
SSC-P2S5D1F301G |
N/A |
|
2.4 |
SSC-P45A1F301G |
N/A |
|
3 |
SSC-P35C1F301G |
SSC-PE5Cxxx1F300G |
APC, Conical
(Pre-angled ferrule, Green boot) |
0.9 |
SSC-PN1811G3151G |
SSC-PNE89xxx1G300G |
|
2 |
SSC-PN28B1G301G |
SSC-PNE8Bxxx1G300G |
|
2 (short boot) |
SSC-PN2S8D1G301G |
N/A |
|
2.4 |
SSC-PN48A1G301G |
N/A |
|
3 |
SSC-PN38C1G301G |
SSC-PNE8Cxxx1G300G |
APC, Stepped
(Pre-angled ferrule, Green boot) |
0.9 |
SSC-PN1811G3151G |
SSC-PGE89xxx1G300G |
|
2 |
SSC-PN28B1G301G |
SSC-PGE8Bxxx1G300G |
|
2 (short boot) |
SSC-PN2S8D1G301G |
N/A |
|
2.4 |
SSC-PN48A1G301G |
N/A |
|
3 |
SSC-PN38C1G301G |
SSC-PGE8Cxxx1G300G |
|
FC2 (MDTK-02-120G) |
PC
(Pre-domed ferrule, Black boot) |
0.9 |
SAP-41803100G |
SAP-819xxx113D0G |
|
2 |
SAP-11201100G |
SAP-816xxx113D0G |
|
3 |
SAP-11301100G |
SAP-813xxx113D0G |
APC, Conical
(Pre-angled ferrule, Green boot) |
0.9 |
SNP-588080x1G |
SNP-889xxx183x1G |
|
2 |
SNP-282080x1G |
SNP-886xxx183x1G |
|
3 |
SNP-283080x1G |
SNP-887xxx183x1G |
APC, Stepped
(Pre-angled ferrule, Green boot) |
0.9 |
SNP-588080x1G |
SGP-889xxx183x1G |
|
2 |
SNP-282080x1G |
SGP-886xxx183x1G |
|
3 |
SNP-283080x1G |
SGP-887xxx183x1G |
|
ST (MDTK-02-110G) |
PC, Single Mode
(Pre-domed ferrule, Black boot) |
0.9 |
N/A |
SLP-181xxx10300G |
|
3 |
N/A |
SLP-180xxx10300G |
PC, Multi-Mode
(Flat ferrule, Black boot) |
0.9 |
N/A |
SLP-241xxx10300G |
|
3 |
N/A |
SLP-240xxx10300G |
|
MU (MDTK-02-130G) |
PC
(Blue boot) |
0.9 |
SMU-C1910C300G |
SMU-P91xxx1C300G |
|
2 |
SMU-C2920C300G |
SMU-P92xxx1C300G |
APC
(Green boot) |
0.9 |
SMU-CN1810C300G |
SMU-PN81xxx1E300G |
|
2 |
SMU-CN2820C300G |
SMU-PN82xxx1E300G |
|
LC (MDTK-02-140G) |
PC
(White/Grey boot) |
0.9 |
SLC-C1310C301G |
SLC-P131xxx1C302G |
|
2 |
SLC-C2320C301G |
SLC-P232xxx1C302G |
APC
(Green boot) |
0.9 |
SLC-CN1810C301G |
SLC-PN181xxx1C301G |
|
2 |
SLC-CN2820C301G |
SLC-PN282xxx1C301G |
Notes:
1) For xxx code use table above
2) For FC connector key width x codes use
table below
FC Connector Key Widths
|
Width (mm) |
Housing plug (key) |
Adapter (keyway) |
Code (x) |
|
PC |
2.0 ±0.15 |
2.4 ±0.2 |
N/A |
|
APC Wide Key - N 'Normal' type |
2.14 +0/-0.05 |
2.15 +0.05/-0 |
D |
|
APC Narrow Key - R 'Reduced' type |
2.02 +0/-0.05 |
2.03 +0.05/-0 |
K |
|
|
Clay House, Harnage, Shropshire, SY5 6EF Tel: 0845
3655061, Fax: 07005 982624, Email:
info@bbnint.co.uk |
