Mid-Wave Infra-Red Detectors

0.5-3um Lead Sulphide Infra-Red Detector Array

0.5-3um Lead Sulphide Infra-Red Detector Array

Agiltron manufactures state-of-the-art Lead Sulfide (PbS) sensors for room temperature operation as well as thermoelectrically cooled operation for spectroscopy from 0.5 to 3 microns. The linear array has 128 elements. The device can be supplied with integrated optical filters. It can be connected with pre-amplifiers or multiplexed amplifiers for various applications. Thermoelectric cooler and thermistor can be built in for temperature stabilisation.

BBN International supplies Agiltron 0.5-3um Lead Sulphide Infra-Red Detector Array
1-3um Lead Sulphide Infra-Red Detectors

1-3um Lead Sulphide Infra-Red Detectors

Agiltron manufactures state-of-the-art lead sulfide devices (PbS) for room temperature operation as well as enhanced sensitivity thermoelectrically cooled operation. These devices can be supplied with integrated optical filters, pre-amplifiers or multiplexed amplifiers for high density arrays.

BBN International supplies Agiltron 1-3um Lead Sulphide Infra-Red Detectors
1-5um Lead Selenide Infra-Red Detectors

1-5um Lead Selenide Infra-Red Detectors

Agiltron manufactures state-of-the-art lead selenide devices (PbSe) for room temperature operation as well as enhanced sensitivity thermoelectrically cooled operation. These devices can be supplied with integrated optical filters, pre-amplifiers or multiplexed amplifiers for high density arrays.

BBN International supplies Agiltron 1-5um Lead Selenide Infra-Red Detectors
2-5um Lead Selenide Amplified Infra-Red Detector

2-5um Lead Selenide Amplified Infra-Red Detector

PDAD series detector integrates a wide range of detector with an amplifier into compact packages. The low noise voltage amplifier is capable of driving 50 Ω loads. PDAD-1IP02300 has a 2x2mm active area lead Selenide (PbSe) detector that covers wavelength from 2 to 5μm.

BBN International supplies Agiltron 2-5um Lead Selenide Amplified Infra-Red Detector
2-5um Lead Selenide Infra-Red Detector Array

2-5um Lead Selenide Infra-Red Detector Array

Agiltron manufactures state-of-the-art lead sensitivity Selenide devices (PbSe) for room temperature operation as well as thermoelectrically cooled operation for spectroscopy from 1 to 5 microns. The linear arrays are typically with 64 element. The device can be supplied with integrated optical filters. They can be connected with pre-amplifiers or multiplexed amplifiers for applications. Thermoelectronic cooler and thermistor can be built in for temperature stabilisation.

BBN International supplies Agiltron 2-5um lead selenide infra-red detector array

-