Optical Patch Cords

Single Mode Patch Cords

With all connector, fibre and cable types and any length patch cords for all single mode applications.

BBN International supplies Optosun SM patch cord, Optosun SM jumper, Optosun single mode patch cord, Optosun single mode jumper

Multi-Mode Patch Cords

With all connector, fibre & cable types patch cords for all multi-mode applications

BBN International supplies Optosun multi-mode patch cords, Optosun MM patch cords, Optosun multi-mode jumpers, Optosun MM jumpers

PM Patch Cords

With all connector, fibre and cable types and any length patch cords for all polarisation maintaining applications.

BBN International supplies Optosun PM patch cord, Optosun PM jumper, Optosun polarisation maintaining patch cord, Optosun polarisation maintaining jumper

Shortwave Patch Cords

With all connector, fibre and cable types and any length patch cords for all 780/850/980/1060nm applications.

BBN International supplies Optosun shortwave optical patch cord, Optosun shortwave optical jumper

RGB Patch Cords

With all connector, fibre and cable types and any length patch cords for all 488/532/635nm applications.

BBN International supplies Optosun RGB patch cord, Optosun RGB jumper

Fibre array is an essential component used in the WDM systems to connect optical fibre and AWG chips. Our precision processing technology, which we have developed for years, provides high fidelity, quality and core pitch accuracy. High quality Seikoh-Giken connectors are available at the end of fibres.

BBN International supplies Seikoh Giken fibre array

Hybrid Patch Cords

Our precision optical cable manufacturing services can provide a wide range of standard and custom cables to meet a wide range of requirements. Speciality cables, master reference and key adjust cables available. All cables are tested, serialised, labelled in individual bags with complete test information. Production facility meets the strictest quality control under ISO9001 and connector components meet or exceed industry standard performance levels U.S. Pat. No. 5,668,905

BBN International supplies Seikoh Giken hybrid optical patch cord

Master (Reference) Patch Cords

Reference (master) cable assemblies are necessary for component test procedures. These can come in single‐side master version or both‐side master version. Single‐side master version is the most commonly used in component test procedures. Master side provides connection to device under test (DUT), while equipment side provides connection to the equipment´s output or input port. Ferrules or master connectors are specially selected for lowest achievable concentricity, ovality and triangularity

BBN International supplies Optocon master optical patch cord, Optocon reference patch cord

Mode Conditioning Patch Cords

Mode Conditioning Patchcord is designed for use in Gigabit Ethernet 1000BASE-LX solution. This duplex patch cord consists of connectors on each end with a single-mode fibre offset to a multi-mode fibre connection in one of the two ends. It is compliant with the IEEE 802.3z application standard. This patch cord is necessary to allow -LX 1300 nm transceiver modules to be used for Gigabit Ethernet. A mode conditioning patch cord eliminates multiple signals by allowing the single-mode launch to be offset away from the centre of a multi-mode fibre.

BBN International supplies Cellco mode conditioning patch cord

OTDR Launch Leads

Measuring an insertion loss of the near-end and / or far-end connection of a fiber optic link with an OTDR requires a launch and / or receive test cable. A launch cable, which connects the OTDR to the link under test, reveals the insertion loss and reflectance of the near-end connection. A receive cable, which connects to the far-end of the link, reveals the insertion loss and reflectance of the far-end connection. Launch and receive test cables can range from 150 m to 1 km (or longer) in length. Because very long test cables are impractical to transport and use, Noyes offers coiled lengths of 50 mm multi-mode, 62.5 mm multi-mode, or single-mode fibre packaged in compact rings.

BBN International supplies AFL, fibre optics, fiber optics, Optical Patch Cord, OTDR launch ring, FR1-

Pigtails

With all connector, fibre and cable types and any length pigtails for all single mode & multi-mode applications.

BBN International supplies Cellco optical pigtail

PM Single Dual Pigtail

With all connector, fibre and cable types and any length patch cords for all single & dual fibre polarisation maintaining applications.

BBN International supplies Optosun PM single fibre pigtail, Optosun PM dual fibre pigtail

Polarisation Maintaining Patch Cord 2000nm

With all connector, fibre and cable types and any length patch cords for all polarisation maintaining 2000nm applications.

BBN International supplies Optosun 2000nm polarisation maintaining patch cord, Optosun 2000nm PM patch cord

Ribbon Cables

The pre-terminated cable is delivered with connectors at one or both sides. The cable is prepared for installation in FOSS FP70 and FP80 panel* - 1 m of the fibre is protected by a spiral cable wrap and may therefore, be placed under the drawer. This simplifies maintenance because it enables you to take the drawer out of the panel (without loosening the fibres from their guides). As an option the connector sides of the cable may be protected with a flexible tube. This is often used if this side needs to be pulled for a long distance. Outside this tube an optional cable pulling grip may be placed if the cable shall be pulled through tubes.

BBN International supplies Optocon ribbon fibre patch cord