Fibre Strain Sensors

BBN International supplies Micron Optics 25/100cm Gauge Length Embeddable Optical Strain Sensor

FFA-01 is a fibre array with configurable number of FBG elements and their spacing over the fibre length. FFA-01 is typically used for direct gluing to the measured surface to capture strain changes of the monitored structure. BBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBG, strain, array, bare

BBN International supplies Micron Optics Bolt Fixing Surface Mounted Optical Strain Sensor

ESA-01 is an embeddable sensor array with variable number of FBG sensors (min = 1, max = custom) directly embeddable into concrete. ESA-01 offers measuring of strain changes in µɛ or µm units between its own anchoring points. ESA-01 can be connected in series configuration.BBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBG, strain, array, embeddable

ES-01 is directly embeddable strain sensor without requiring any further supportive elements. ES-01 offers measuring of strain changes in µɛ or µm units between its own anchoring points. ES-01 can be connected in series configuration.BBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBG, strain, embeddable

The Strain Gage SG-01 is the fibre optic equivalent of an electrical strain gage. The Strain Gage SG-01 can be mounted directly on the surface of a structure by means of an adhesive. In this way, the fibre sensor makes direct contact with the surface and therefore accurately measures the strain at the surface. Supply of the strain gages, installation tools and instruction manual can be found in the Strain Gage Installation Kit (SGK-01).BBN International supplies FBGS, strain gauge, sensor

The Strain Gauge Chain SGC-01 is a spliceless chain of several fibre optic Strain Gauges in series. These Strain Gauges are the fibre optic equivalent of electrical strain gauges. The Strain Gauges can be mounted directly on the surface of a structure by means of an adhesive. In this way, the fibre sensor makes direct contact with the surface and therefore accurately measures the strain at the surface. Supply of the installation tools and instruction manual can all be found in the Strain Gauge Installation Kit (SGK-01).BBN International supplies FBGS, strain gauge, chain, sensor

A Draw Tower Grating (DTG®) array is embedded in a Glass Fibre Reinforced Plastic (GFRP) round profile. The DTG® array embedded in the GFRP is designed to measure the total strain caused by both the thermal expansion and the mechanical stress. The position and the wavelength of each DTG®, as well as the pigtail length and connector type, are specified by the customer. The SMW-01 comes with a standard GFRP outer diameter (OD) of 0.5mm or 1mm and can optionally be protected with an additional High-Density Polyethylene (HDPE) outer jacketBBN International supplies FBGS strain sensor wire, optical strain sensor wire, fibre strain sensor

GFA-01 is a fiber array with configurable number of FBG elements and their spacing over the fiber length. The outer layer is Glass Fiber Reinforced Polymer (GFRP) coat which protects the FBG sensors and ruggedizes the construction. GFA-01 is typically used for direct embedding or gluing to the measured surface to capture strain changes of the monitored structure. BBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBG, strain, array, bare fibre

BBN International supplies Micron Optics Long Gauge Length Surface Mountable Optical Strain Sensor

MSA-01 is a strain array sensor with variable number of FBG sensors (min = 1, max = custom) and various gauge lengths.BBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBG, strain mountable array

Short gauge strain sensor with 8- 10cm measuring base (gauge length). MS-01 offers measuring of strain changes in µɛ or µm units between its own anchoring points. Pre-strain setup during installation up to ±5000µɛ. MS-01 can be connected in series configuration.BBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBG, strain, mountable

BBN International supplies Non-Metallic Embeddable Optical Strain Sensor With Temperature Compensation

BBN International supplies Micron Optics Non-Metallic Surface Mountable Optical Strain Sensor

BBN International supplies Micron Optics Rugged Weld Fixed Surface Mountable Optical Strain Sensor

BBN International supplies Micron Optics Rugged Weldable Surface Mountable Optical Strain Sensor

SDS-01 is a 500mm or 1000mm long sensor measuring strain changes in µɛ with bendable body structure allowing simple installation onto circular objects Connections in series configuration are possible to form a full circumference monitoring system within one cable Integrated temperature compensationBBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBR, sewer deformation

SWA-01 is a spot-weldable strain array sensor with variable number of FBG sensors (min = 1, max = custom) and flexible body simply adaptable to any surface curvature. Shortest length for 1xFBG configuration is 30mm, however standardly offered as 40mm for easier installation. [Optional] Integrated temperature compensation. BBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBG, strain, array spot-weldable

SWS-01 is a short gauge spotweldable strain sensor measuring strain changes in µɛ or extensions (elongation) in µm. Integrated temperature compensation. SWS-01 can be connected in series configuration.BBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBG, strain, spot weldable

Long gauge strain sensor with 30cm to 10mtr measuring base (gauge length). SC-01 is measuring strain between its anchoring brackets and is therefore immune to local defects or inhomogeneity. Integrated temperature compensation. SC-01 can be connected in series configuration.BBN International supplies Sylex, fibre optics, fiber optics, optical sensor, FBG, strain

BBN International supplies FBGS, fibre optics, fiber optics, strain gauge, installation kit

BBN International supplies Micron Optics Weld or Epoxy Fixed Surface Mount Optical Strain Sensor